Overview
This release brings the redesigned Pressure or Relief tool to LeoSpinal, with predefined and custom shapes, landmark anchoring and reusable presets. A new design selection dialog, reorganized mold settings and separate controls for each layer of double-shell designs make design setup clearer, and two new two-piece TLSO templates have been added. PLY files with vertex colors can now be imported directly, new reference lines and grids help with orientation, and measurements are saved in your project files.
Key Enhancements
Pressure or Relief
The Pressure or Relief tool has been completely redesigned.
In the initial view, you can either load a preset or add a new shape. Clicking Load preset opens a file browser dialog for importing a preset JSON file.
The Add new shape dropdown contains all available predefined shapes. When a shape is selected, it is automatically placed on the spinal model at its predefined position using its default parameters. Multiple shapes can be added consecutively, as the dropdown remains open until it is manually closed.
After adding a shape or loading a preset, the Save Preset button becomes active. This allows all currently listed shapes and their settings to be saved as a preset.
The shape list always contains one active item. The active shape is displayed with a red contour, while inactive shapes are shown in gray. By default, the first item or the most recently selected item is set as active.
The active shape can be configured by adjusting the height of all inner control points, the height of the selected inner control point, the slope controlling the falloff between the inner and outer points, and the outer smoothing option, which provides additional refinement of the outer boundary and has no effect by default.
In addition to the predefined shapes, custom shapes can be created. Control points for the inner and outer boundaries can be added or removed independently, and individual shapes can be deleted.
Some shapes can be anchored to anatomical landmarks. When creating a new shape, a landmark can be selected as an anchor, ensuring that the shape is automatically snapped to the correct position when a preset is loaded.
When the Apply button is clicked, all shapes are applied to the scan simultaneously. Once applied, the shapes can no longer be edited individually. This operation can only be reverted using the global Undo or Reset buttons.
Design Selection
The previous Select Design dropdown has been replaced by a button that opens a design selection dialog.
Designs are divided into two categories: Full Orthosis and Mold.
Full Orthosis contains standard spinal orthosis designs, which can be either single- or double-shell.
Mold contains designs used for mold-based manufacturing.
Selecting a design in the dialog does not immediately change the current workspace. The selection must be confirmed with Apply or discarded with Cancel.
Mold Settings
The previous Height Limit slider and Positive Model toggle have been removed. Whether a design uses mold-based manufacturing is now determined by the selected category.
The Pipe, Flare Height, Flare Radius, and Pipe Shape controls have been moved into the Outline component. Pipe Shape is always displayed but is disabled when Pipe is turned off.
A new Offset slider has been added above Flare Height.
The Outline settings depend on the selected design type and layer. Single-shell Full Orthosis designs show General Thickness and General Offset. For double-shell Full Orthosis designs, the Outer layer has General Thickness, while the Inner layer has both Thickness and Offset.
Mold designs show the mold-specific parameters.
Layer and Visual Settings
Double-shell designs have separate Orthosis Color settings for the inner and outer/mold layers, as well as separate opacity controls. The default color of the inner layer is gray. Color selections are stored locally in the browser.
The Show trimline control has been renamed Show trimlines and moved to the View section.
Double-shell designs have separate trimline visibility controls for the Inner and Outer/Mold layers. Trimlines of the active layer are displayed in red, while inactive-layer trimlines are displayed in gray.
PLY Texture Support
Vertex colors are now supported for PLY files. Models with fused vertex colors or embedded texture data can be imported directly without requiring a separate texture import step.
Two New TLSO Templates
Two new two-piece TLSO templates have been added, each composed of an anterior and a posterior shell. In addition to a single-layer design, a dual-layer design is included so that a flexible inner layer can also be generated alongside the rigid outer shell.
Improvements and Fixes
Updated Interface for Bend, Twist, and Stretch Scale Tools
The parameters for the Bend, Twist, and Stretch Scale tools have been renamed and rearranged so that editing can be performed faster and more logically.
Reference Line and Reference Grid Settings
New Reference Line and Reference Grid sections have been added to the View Panel, featuring high-contrast axis lines and independent visibility toggles for the X, Y, and Z axes, as well as the Sagittal, Coronal, and Transverse planes. Additionally, a Show in front toggle has been placed at the bottom of the panel so that reference lines and grids can be viewed through the scan.
Component Changes
Component management has been expanded for Full Orthosis and Mold designs.
Full Orthosis designs now allow Outline components to be enabled, disabled, added, or removed. Mold designs also allow Outline, Inner, SplineGradient, and supported CustomShape components to be added or removed.
Rounded Loop Option
A rounded version of the loop has been added and can now be selected as an alternative to the standard square design.
Cutout Presets for Common Strap Sizes
New cutout presets have been added for the most frequently used strap dimensions.
Reinforcement Contours
Reinforcements now have an Is closed toggle for switching between open and closed contours.
Closed contours no longer show Custom interpolation point thickness and End-point spreading settings, as these settings do not apply to closed contours. A Rounding slider has also been added to End-point spreading.
Measurements Saved in Project Files
Measurements placed on scans are now saved in the project file during export and remain visible after re-import.
Overlapping Trimlines
Fixed a visual issue where trimlines from different layers with the same path could interfere with each other. The active layer’s trimline color is now correctly displayed.
Component Group Locking
Fixed an issue with component groups in Mold mode where disabling a single component could lock the entire group. The group is now locked only when all components within it are disabled.
Positive Model Mode for Custom Templates
An issue where project files loaded into 3D shell mode instead of positive mode and could not be switched back has been resolved.
Regional Smoothing Brush Jitter
An issue where the brush in Regional Smoothing mode would jitter and slightly change size when moved over the model has been resolved.
We hope these enhancements prove valuable to your workflow. For any questions or feedback, please do not hesitate to contact your LeoShape representative, or fill out our contact form and we will get back to you shortly.
